Chevrolet Sail 2010 Learner’s Manual page 117

the MIN （minimum） mark on the fluid level indicator.
Please Follow the Steps Below:
Do not run the steering fluid pump without steering fluid. Slowly turn the steering wheel to the left and
right by 45 degrees two to three times, and then fully turn it twice. Adjust the liquid level of the steering
fluid in the fluid storage tank.
Stop the engine and check the fluid level. Maintain the fluid level at the MIN （minimum） mark.
Do not reuse exhausted steering fluid.
3. Return the steering wheel to the middle position. Run the engine for 2 - 3 minutes.
4. Test the vehicle on the road, and make sure that the steering function operates properly without noise.
5. Recheck the fluid level according to step 1 and step 2. Make sure that the fluid level is at MAX（maximum）
mark after the system reaches normal working temperature and becomes stable on that temperature. Add
more steering fluid if necessary.
Chevrolet 2010 New Sail New Technical Training
113
- Learner's Manual