Component Diagram （1.4L; Power Steering System Exhaust - Chevrolet Sail 2010 Learner’s Manual

6.2.2 Component Diagram （1.4L）
1. Power Steering Pump Fluid Storage Tank
2. Power Steering Pump Fluid Storage Tank Outlet
Pipe
3. Power Steering Pump
4. Steering Pump Belt Pulley
5. Power Steering High Pressure Pipe

6.3 Power Steering System Exhaust

Special Precautions:
Please refer to "special precautions of the inlet air in the power steering system" in the "cautions and
precautions" of the maintenance manual.
Every time when adding steering fluid or completely replacing it, make sure to use power steering fluid
meeting the SGM specifications or power steering fluid with equivalent quality, and please refer to
"power steering system specifications". If improper power steering fluid is used, the power steering hose
and sealing parts might be damaged, the steering fluid might leak and the steering fluid pump might
undergo malfunction（s）.
Do not fully turn the steering wheel in any direction for a long time, otherwise the steering pump might
be damaged early.
1. Fully turn the steering wheel to the left without starting the engine. Add the power steering fluid and fill to
the MIN （minimum） mark on the fluid level indicator.
2. Start the engine. Run the engine in fast idle, and recheck the fluid level. If necessary, add more fluid to fill to
Chevrolet 2010 New Sail New Technical Training
- Learner's Manual
6. Steering Gear Inner Tie Rod
7. Steering Gear Outside Link Self-Locking Nut
8. Steering Gear Outer Tie Rod
9. Steering Gear Inner Tie Rod Shield
10. Steering Gear
11. Power Steering Oil Return Pipe
112