Roland KC-400 Owner's Manual page 11

Advanced Stereo Link
This lets you connect up to ten input devices using the CH1–CH4
and AUX IN jacks of the two KC-990 units.
CH1–CH4 jacks
AUX IN jacks
KC-990 (L)
STEREO LINK: OUT R jack0IN jack
STEREO LINK: IN jack1OUT L jack
1.
Connect the input devices to the
KC-990 (L) and KC-990 (R).
2.
Use a phone cable to connect the KC-990 (L)'s LINK
OUT R jack to the KC-990 (R)'s LINK IN jack.
3.
Use a phone cable to connect the KC-990 (R)'s LINK
OUT L jack to the KC-990 (L)'s LINK IN jack.
KC-990 (L)
4.
Power-on the KC-990 (L), and then power-on the
KC-990 (R).
For details, refer to "Turning the Power On/Off" (p. 9).
5.
Adjust the volume of the devices that are
connected to the KC-990 (L) and KC-990 (R).
For details, refer to "Setting the Volume of Each Device" (p. 9)
6.
Adjust the volume and tone of the
KC-990 (L) and KC-990 (R), using the [VOLUME]
knob and EQUALIZER knobs of each unit.
In general, use the same settings. Adjust each unit as necessary.
CH1–CH4 jacks
AUX IN jacks
KC-990 (R)
KC-990 (R)
Using Two Amps in Stereo (Stereo Link)
11