Table of Contents
Advertisement
1MRS757866 C
3.6
3.7
3.8
PCM600
Getting Started Guide
Installing language add-on packages
Install both the language add-ons for PCM600 and the language add-ons for the IED
connectivity packages.
1.
On the taskbar, click the Start button, and point to All Programs, point to ABB,
and then click Update Manager.
2.
Click Settings in the left navigation bar to enable the preferred languages.
3.
From the list in the upper left corner, select Show All Available Updates.
4.
Select the correct language add-on file and click Download and Install.
Selecting the system language
To change from the default language to another language, install first the language
add-on packages. Different Connectivity Packages have different language add-ons
available.
1.
On the PCM600 menu bar, point to Tools and click Options.
2.
Click System Settings.
3.
Select the PCM600 and IED languages and click OK.
•
PCM600 Language defines which language is used in the user interface
of PCM600.
•
Default IED Configuration Language determines the language of the
IED specific content of newly created IEDs. The drop-down list contains
all the languages supported by all the active connectivity packages. If the
used connectivity package does not support the selected language, English
is used. The IED's language can be later changed using the IED shortcut
menu Configuration Language.
Installing software packages on a computer that is
not connected to the Internet
1.
To install software packages needed for PCM600 on an offline computer, first
use a computer connected to the Internet.
1.1. Open Update Manager and select Export Software Packages.
1.2. Select the desired packages and click Download and Export.
1.3. Select folder to export packages on removable disk or network.
2.
After download and export, connect the removable disk or network to offline
computer.
Section 3
Getting started
15
- Quick Links:
- This Manual
Hide quick links:
Advertisement
Table of Contents
