Panasonic KX-TGP550 Configuration Manual page 2

To begin configuring your Panasonic KX-TGP5XX for use on Voice Services network, you will need to enable the graphical user
interface. For this, do the following:
1. Press the Menu on Base
2. Select IP Service
3. Select Network Setting
4. Select Embedded Web
5. Toggle to "ON"
6. Select the "Save" Softkey
To locate the IP and access the Web Interface the following:
1. Press the Menu on Base
2. Select IP Service
3. Select Network Setting
4. Select IP address
5. Write down and enter the IP address listed into a web browser
6. Log in using the credentials admin/adminpass
You will then be presented with a screen that looks like this:
**** First thing we will want to do is Reset the Base and make sure to Deregister any extra handsets. Make sure you
only have as many handset Registered as physically have on site.
To Reset the Base this is done under the Maintenance Tab > Reset to Defaults
*** NOTE: If the Phone came from another provider, that provider may have to factory default the phone.