INSTRUMENT CLUSTER
LCD Instrument Cluster Modes*
Press Mode button
A
to scroll through the different LCD modes:
Trip Computer Mode: Displays driving information for
tripmeter, fuel economy, etc .
A/V Mode*: Displays the state of the A/V System
Turn-by-Turn Mode*: Displays the state of the navigation
User Settings Mode: Change settings of the doors, lamps
and other features
Information Mode: Informs on service intervals and
pressure status of each tire and other features
A
(Button panel located on
Steering Wheel, Type B)
ALWAYS CHECK THE OWNER'S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Trip Computer / Tripmeter
The Trip Computer is a driver information system that displays information
related to driving on the display when the ignition switch or the ENGINE
START/STOP button* is in the ON position .
256
RANGE
mi.
6.5
Avg.
L/100km
0
10
20
30
(Type C cluster shown)
Instrument Cluster Type A – To toggle
through the different Trip Computer modes,
press the Trip button
B
. When in Tripmeter,
press the Trip button
B
again to select Trip A
or Trip B . Press and hold the Reset button
reset the Tripmeter to zero .
Instrument Cluster Type B/C – To scroll
through the different LCD Instrument Cluster
modes, press the Mode button
D
the Tripmeter, press the Mode button
select Trip Computer
. Then press the Next
button
E
to scroll to the Trip A/B screens .
Press and hold the Select/Reset button
reset the Tripmeter to zero .
REMINDERS:
•
Appearance of Tripmeter display may differ as equipped
•
All stored driving information (except Odometer and Range)
is reset if the battery is disconnected
Digital Speedometer
(for Type B, C)
TRIP
RESET
C
to
C
(Located on Type A
steering wheel)
. To display
D
and
E
F
to
(Located on Type B
F
steering wheel)
*IF EQUIPPED
B
D
5