Mounting In Or On A Counter; Cart Information And Mounting - Cornelius Viper Elite Operator's Manual

Low overrun
Table of Contents

Advertisement

M
OUNTING IN OR ON A
!
WARNING:
When installing the unit in or on a counter top, the counter must be able to support a weight in excess of 450 lbs. to insure
adequate support for the unit. FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY, DEATH OR EQUIPMENT
DAMAGE.
NOTE: Many units incorporate the use of additional equipment such as ice makers. When any
addition equipment is used you must check with the equipment manufacturer to
determine the additional weight the counter will need to support to ensure a safe
installation.
C
I
ART
NFORMATION AND
The Viper unit may be mounted on a mobile cart (Cornelius part no. 620043075 for 2-barrel unit, 620053990 for 3-
barrel unit and 620046556 for 4-barrel unit) which allows some movement of the unit for service and cleaning. There
are four captive nuts on the bottom of the Viper to accommodate four 3/8-16 bolts. These bolts must be installed to
secure the unit to the cart.
These carts are also designed with movable wheels that act as outriggers to provide stability to the unit when it is
being moved.
!
WARNING:
The above listed mounting bolts must be installed and the wheels extended and locked in the outboard position prior to moving
the unit.
FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY, DEATH OR EQUIPMENT DAMAGE.
THE APPLIANCE HAS TO BE PLACED IN A HORIZONTAL POSITION.
© 2015-2017, Cornelius Inc.
C
OUNTER
M
OUNTING
- 3 -
Operator's Manual
Publication Number: 621360241LOEWOP

Advertisement

Table of Contents
loading

Table of Contents