Mercedes-Benz G 550 2015 Operator's Manual page 86

Seats
84
You can find further information about
i
enlarging the cargo compartment (folding
the rear bench seat forwards) on
( page 195).
Y
Information in the Digital Operator's
Manual
In the Digital Operator's Manual you will find
information on the following topics:
Adjusting the seats
R
Adjusting the head restraints
R
Removing/installing head restraints in the
R
rear
Adjusting the multicontour seat
R
Adjusting the 4-way lumbar support
R
Switching the seat ventilation on/off
R
Adjusting the head restraints
Important safety notes
G
WARNING
If head restraints are not installed and adjus-
ted correctly, they cannot provide protection
as intended. There is an increased risk of
injury in the head and neck area, e.g. in the
event of an accident or when braking.
Always drive with the head restraints instal-
led. Before driving off, make sure for every
vehicle occupant that the center of the head
restraint supports the back of the head at
about eye level.
Observe the following when adjusting the
head restraints:
Do not rotate the head restraints of the
X
front and rear seats.
Otherwise, you cannot adjust the height
and angle of the head restraints correctly.
Adjust the head restraint so that it is as
X
close as possible to your head.
Adjusting the front seat head restraint
height
Head restraint height
:
Seat cushion angle
;
Seat height
=
Seat fore-and-aft adjustment
?
Backrest angle
A
Slide head restraint adjustment button :
X
up or down in the direction of the arrow.
Adjusting the luxury head restraints
To adjust the side bolsters of the head
X
restraint: push or pull right and/or left-
hand side bolster : into the desired posi-
tion.
To adjust the angle of the head
X
restraint: push or pull the head restraint in
the direction of arrow ;.
Resetting the front seat head restraints
It is necessary to reset the front seat head
restraints after the voltage supply has been