Mercedes-Benz G 550 2015 Operator's Manual page 26

Digital Operator's Manual
24
Turn cVd the COMAND controller to select
X
individual vehicle components.
Individual vehicle elements are highlighted
in red. Just one vehicle component per view
is highlighted.
To confirm the currently selected section,
X
press W the COMAND controller.
After you have selected a section, one of the
following happens:
you go straight to the corresponding sec-
R
tion in the Digital Operator's Manual.
a list opens up with further, in-depth head-
R
ings that you can select using the COMAND
controller.
you go down a level to the visual search.
R
You can refine your search here by turning
the COMAND controller and selecting indi-
vidual vehicle elements which are highligh-
ted in red =.
Keyword search
The keyword search allows you to perform a
keyword search using character entry. A
detailed description of character entry can be
found in the section "COMAND" under the
heading "Phone book - entering characters".
Selection list of available keywords
:
Character bar
;
% Back button
=
To enter a keyword: turn cVd or slide
X
ZVÆ XVY the COMAND controller to
select a character.
To confirm the character, press W the
X
COMAND controller.
Selection list : is then filtered.
Select characters in the same way until
X
COMAND jumps automatically to selection
list :.
Alternatively, you can call up selection
list : by pressing OK.
Contents
In the contents, the topics are listed in the
same order as in the printed Operator's Man-
ual. You can select a section and then a sub-
section.
Topic bar
:
Currently selected section in the contents
;
Section not currently selected in the con-
=
tents
% Back symbol
?
Turn cVd or slide ZVÆ XVY the COMAND
X
controller to select the desired section.
To confirm the selection, press W the
X
COMAND controller.
A further selection list with the correspond-
ing subsection opens.
Select the corresponding subsection in the
X
same way.