VeriFone Vx670 Installation Manual page 18

T S
ERMINAL ETUP
Examining Connection Ports
NOTE
Examining
Connection
Ports
18
V X 670 I
NSTALLATION
a
A 12-key, telephone-style keypad (keypads may vary in style).
b
Six ATM-style function keys, labeled F0 to F5, to the right of the LCD
screen.
c
Four programmable function keys above the keypad.
d
Three color-coded function keys below the
keypad (icons at right; from left to right:
,
CLEAR ENTER
e
An ALPHA key centered at the top of the keypad.
•
A magnetic card reader, built into the right side. Swipe the card using the
proper direction, with the magnetic stripe down and facing inward, toward the
keypad.
•
A green indicator LED indicates power is ON.
•
An internal thermal printer at the back of the terminal.
•
A smart card reader, built into the front of the terminal. For directions on how
to use a smart card, see
•
A SAM (security access module) compartment, built into the bottom of the
terminal. The V
stored-value card programs or other merchant card requirements.
VeriFone ships variants of the V
may have a different configuration. The following devices may or may not be
present: a smart card reader, or zero or three MSAM cardholders. However, the
basic processes described in this guide remain the same, regardless of terminal
configuration.
The V 670 terminal has one primary port that supports different peripherals
x
through the use of various cables.
Figure 3 The V
G
UIDE
).
Conducting Smart Card
x
670 terminal contains MSAM cardholders to support multiple
x
670 terminal for different markets. Your terminal
x
670 Primary Port (Bottom View)
,
CANCEL
Transactions.