Skype" User Account; Administrator" User Account; Connecting Peripherals; Configuring Hub 500 - Lenovo ThinkSmart Hub 500 Deployment Manual

Lenovo ThinkSmart Hub 500
Deployment Guide

"Skype" user account

This account is the default account from which the Skype Room Systems app (SRS) runs from. This
account is limited to running the SRS app. This account is the default recommended account from
which to run SRS. No administrator privileges are available from this account.
When the Hub boots, it will automatically login into the "Skype" account and will automatically launch
the SRS app. No user intervention required.

"Administrator" user account

This account is the standard Windows administrator account and provides system-wide privileges. This
account is password protected. The default password is "sfb" without quotes. For a typical day-to-day
usage, the administrator credentials are not needed. The admin account is only used for device
management. The default account to run the SRS app is "Skype" and this account will be automatically
logged in when the Hub 500 boots.

Connecting Peripherals

The Hub 500 has four standard USB 3.0 ports in the back and can support running any compatible USB
peripherals. Some of the popular USB peripherals for the Hub 500 are Cameras, satellite or extended
microphones and speakers.
In most cases once a USB device is inserted into the USB port, the Hub will automatically detect and
install the corresponding drivers needed to run the peripherals.

Configuring Hub 500

When the Hub is powered on, the Hub will automatically login to the "Skype" account and will launch
the Skype Room Systems (SRS) app.

First time configuration

When the Hub is turned on for the first time, an appropriate Skype or Lync credentials is required in
order to sign in and use the Hub. Please refer to License Requirements.
The first screen is the Microsoft license agreement page.