Push Button Reset (Pbr) - Lenovo ThinkSmart Hub 500 Deployment Manual

Lenovo ThinkSmart Hub 500
Deployment Guide
A lock as highlighted in red below locks the arm in place. Pushing the lock to the right will release the
arm. A similar mechanism is extended to the HDMI-IN cable as well and is highlighted in the picture
below. To release the arm for the HDMI-IN, push the lock to the left to open the arm that secures the
HDMI-IN cable.
Insert the cables to the appropriate ports and then align the cables into the corresponding grooves and
then close the arm and secure it to the lock (shown below)
Note: Upto 40lbs of force might be required to lock the arm in place.
Once all the cables are securely connected and locked in place. Close the cable management bay to look
as shown below.

Push Button Reset (PBR)

Lenovo Hub 500 supports Windows Push Button Reset (PBR) functionality. This feature restores the Hub
to its factory state.
To reset the Hub 500 to factory state,
1. Connect an external keyboard to the Hub 500 via one of the USB ports
2. Restart the Hub or power-off and power-on the Hub, at the beginning of the boot process keep
tapping on the F11 key on the keyboard. This will open the Windows Recovery Environment.
3. Select "Troubleshoot"