To Assemble Armrests - Childcare Glider Rocking Chair & Ottoman "Sand" Instructions Manual

ASSEMBLY / OPERATING INSTRUCTIONS
To attach Seat Cushion continued...
4a. Hook seat cushion loops onto the pins.
4

To assemble Armrests...

1a. Place armrest into position on the seat frame.
1
1b. Ensure the correct armrest is located on the correct
side, as indicated by stickers on the frame and
armrests.
2a. Secure the armrests using 42mm bolts and tighten
2
with Phillips head screwdriver.
Ensure screws are secure but not over-tightened.
3a. Secure the Velcro tabs on the armrests around the
3
bottom bar of the seat frame as shown.
Repeat steps 1-3 to assemble other side armrest.
3b.
WARNING