To Attach Seat Cushion - Childcare Glider Rocking Chair & Ottoman "Sand" Instructions Manual

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Chair Frame continued...
4a. Tighten bolt onto locating tube on armrest using
4
Phillips head screwdriver (not included).
Repeat steps 2-5 to assemble other side screw.
Ensure screws are secure but not over-tightened.

To attach Seat Cushion...

1a. Slide backrest cushion over the top of the seat frame.
1
2a. Pull cushion down until it is completely in position.
2
3a. Slide pocket underneath base of seat cushion over
3
the front of the seat frame.
WARNING