Table of Contents
Advertisement
Console Help
The console "help" and "help set" commands will assist you with information about various command
descriptions as shown on figure 17, below.
Set ip:
Set Unit's IP Address.
Set netmask:
Set Unit's Netmask.
Set gateway:
Set Unit's Gateway IP
Set username:
Set login username
Set password:
Set login password
Set default:
Set unit back to factory default
Note 1: All set commands required reset to apply new settings
Note 2: The default "timeout" value for console setting is two minutes.
Figure 17. TC3720's Console Help
E.g. Set ip 192.168.254.123
E.g. Set netmask 255.255.255.0
E.g. Set gateway 192.168.254.1
E.g. Set username john123
E.g. Set password 123456
- 27 -
E.g. Set default
TC3720
User's Manual
Rev. 1.5
Advertisement
Table of Contents
