Error Status Report - TC Communications TC3720 User Manual

Software Configuration Continue

Error Status Report:

Warning: The error report viewed on a Slave unit will not show breakages not involving the Master or itself.
Figure12, "Error Status Report" will only display those switches that have a
broken fiber link in the self-healing ring. It will show the switch ID, related fiber
port, IP address, and Location Field, where the fiber breakage occurs (two units
will be displayed for each broken link). The Master will display information on
all the units, while the Slave units will display only the master and itself.
Figure 12. TC3720 SHR Error Report Window
- 23 -
TC3720
User's Manual
Rev. 1.5