Table of Contents
Advertisement
Software Configuration Continue
Login Settings:
Displays current Username and Password.
Default Username: user
Default Password: password
When done, click Apply to save the settings.
Note: If you need to change the username and/or password, you can do so by following the steps below.
1. Enter the new username and/or password and click Apply. You will then see a window as in figure
14 on page 25. Click "reset" to save all the changes.
2. Then you will see a window asking you to refresh your browser or enter the new IP to continue. Please
refresh your web browser and then login with the new user name or password when the authentication
window (as in figure 15) pops up to continue the software configurations.
Figure 13. TC3720 Login Settings Window
- 24 -
TC3720
User's Manual
Rev. 1.5
Advertisement
Table of Contents
