Use And Safety - Electrolux K45 1-Sp User Manual

Use and safety

Clean the machine properly prior to its fi rst use
Uncontrolled closure of the lid or ram press involves a risk of crushing the fi ngers.
Never put a hand in the ejection area while the machine is in operation; risk of injury. It is strictly forbidden to put the safety systems
out of action or modify them: Risk of permanent injury!!!!
Check that the safety devices operate correctly each time before using (see paragraph on «safety system adjustments»). Never
put a hand, a hard or frozen object in the appliance
For health and safety reasons, always use a washable or disposable strong head covering that covers the hair completely.
ATTENTION: All operations, whether using, cleaning or maintenance, present risks of cuts; never force and always keep
hands a reasonable distance from cutting edges.
Always use appropriate protective equipment when carrying out these operations.
3. OPERATION - SAFETY
1
• The user's safety is assured by:
- The motor stopping on releasing the lid.
- The need to have the bowl in position before it will start
- The need to press on the On button after each stoppage
("voltage loss'' device).
- The braked stoppage of the motor before accessing the rotor.
- Operation by sustained pressure to check the progress of
work.
- The automatic locking of the rotating rotor through its bayonet
system.
- The dimension of the centre pourer hole providing the means
for the addition of products in OPERATION.
- The design of the bowl (no-leak shaft).
- The easy removal of the bowl, the lid and its seal, the rotor
and the scraper for cleaning them.
• Control panel
1-speed model
A ON button.
B OFF button.
C ON button by sustained pressure.
2-speed model
A ON button at low speed.
B OFF button.
C ON button by sustained pressure at low speed.
D ON button high speed.
E Display of the speed selected
3. CHOICE OF EQUIPMENT
2
• The food processor / emulsifi er is fi tted as standard with a
bowl-lid scraper and a very hard stainless steel dual-knife rotor
(smooth knives for the single speed models and micro-toothed
knives for the 2-speed and variable speed models).
Note: Optional rotors suitable for other work (see table §3.5).
PLEASE CONTACT US.
3.
1
3.
2
ATTENTION!!
Variable speed model
A ON button at the selected speed.
B OFF button.
C ON button by sustained pressure at the selected speed.
E Display of the selected speed
F To increase the speed
G To decrease the speed
• The food processor can be started up if:
- The bowl is properly in place
- The locking pin is correctly engaged (see § 3.3)
- The lid is correctly locked.
a) Continual operation:
Press button A or D.
For the variable-speed model, the speed can be increased or
reduced while running or when at a stop by using the buttons
F or G.
b) Operation by sustained pressure:
Press button C and hold down. This provides the means for
controlling the progress of fi ne work.
c) Stop
Press button B
Note:
Do not stop the food processor by releasing the lid.
• Usage as a food processor / mixer is possible by removing
the scraper from the existing lid or by using a second lid with
no scraper for the following types of work:
- Minced meat, vegetables, etc.
- Grinding and reduction to powder.
- Kneading dough.
3
K45-55-70 GB 01 08