Troubleshooting Guide - Saitek Pro Bridge 311 User Manual

Pro Bridge manual final.qxd
SYMPTOMS
The unit doesn't react or
behaves erratically.
The display is dim or difficult to
read.
The computer seems to be
bidding illegally.
The computer is silent.
No response or improper
response when keys are
pressed.
The computer rejects the card
you have selected.
The computer won't show
previous bids/plays when
HISTORY is pressed.
The computer won't accept a
card or suit when you're editing
a hand.
The score doesn't show when
SCORE is pressed.
2/8/2006 11:42 AM Page 23

TROUBLESHOOTING GUIDE

POSSIBLE CAUSES
• Batteries are not installed
correctly.
• Batteries are weak or bad.
• Poor battery contacts.
• Static discharge or an
electrical disturbance has
caused a lock-up.
• Batteries are weak or bad.
• Dim setting requires LCD
backlight.
• Batteries are weak or bad.
• Sound option is turned off.
• Electrostatic discharge has
caused a malfunction.
• Batteries are weak or bad.
• The selected card isn't yours
(e.g., the card is in dummy's
hand).
• You are not following suit.
• You aren't in the bidding or
playing phase of the game.
• No bids have been made.
• You have already entered 13
cards for the current position.
• The card is already in use for
another player position.
• There are no more cards
available in that suit.
• An error beep will sound if
SCORE is pressed while
current results are showing
during play.
ACTION TO TAKE
• Reinstall batteries (Section
1.1).
• Replace batteries (Section
1.1).
• Ensure that contacts on
batteries and unit are clean.
Make sure that contacts have
not been bent.
• Press into the hole marked
ACL to reset unit (Section
6.1).
• Replace batteries. If problem
persists, use ACL feature to
reset unit (Section 6.1).
• Pressing BACKLIGHT turns
light on/off. Select BL
Intensity menu option to
increase/decrease amount of
light (Section 2.4).
• Replace batteries.
• Turn sound on in Main Menu
(Section 2.3).
• Use ACL feature to reset unit
(Section 6.1).
• Replace batteries. If problem
persists, use ACL feature to
reset unit, as described in
Section 6.1.
• Select and enter another card.
• Select and enter another card.
• You must be in the bidding or
playing phase for History
Mode to work.
• Bids must be made before the
HISTORY feature will work.
• You cannot enter more than
13 cards per player.
• Check the upper portion of
display for available cards.
• Check the upper portion of
display for available cards in
each suit.
• Press ENTER until current
results have all been shown;
then press SCORE.