Connecting To A Pc; Geotagged Video - Uniden iGO CAM 50R Owner's Manual

Connecting to a PC

The iGO CAM 50R must be connected to a PC by using a USB data cable
(not supplied) without the pass through the GPS bracket. The supplied USB
cable is for charging and supplying power only. When the device is connected
to the PC, 'USB cable' icon is displayed on the device's screen.
You can view the SD card contents on the PC. When the device is detected
on the PC as an external drive, select to view the Emergency folder or Video
folder or Photo folder. Select Emergency Folder to view Protected/Locked
video files. Select Video folder to view General Record files and select Photo
folder to view snapshots .
The park mode recording files are saved in Emergency Folder. Recordings or
images arranged in folders according to the specified date.

Geotagged Video

The iGo Cam 50R comes with GPS, allowing your device to automatically sync the
time with GPS. Ensure to select the correct time zone and also enable Daylight
saving if needed.
GPS also allowing your videos to be geotagged. Please ensure that the GPS
bracket is fitted onto the device and ensure the device is able to detect the GPS
signal. You can view the recorded videos on the GPSTrackerPlayer and trace them
on a map.
GPSTrackerPlayer
GPSTrackerPlayer allows you to view the recordings on the iGo Cam 50R
and trace them on a map.
iGO CAM Player software is supported on Windows 7, Windows 10 and
macOS. Download the correct software designated for different platform.
Installing GPSTrackerPlayer
Download the GPSTrackerPlayer from the Uniden website. You may need to
unzip the file using the appropriate archiving software before you can use the
player.
Access the Recorded Files
Before playing the recorded files on the GPSTrackerPlayer, ensure that you
can access the files easily.
Either remove the micro SD card from the recorder, and access the files on
the computer via a card reader.
14
UNIDEN iGO CAM 50R Vehicle Recorder