TECHNICAL DATA
Continous power rating at 4 Ohms per channel ...................................................................................... 2 x 290 Watts RMS
Continous power rating at 2 Ohms per channel ...................................................................................... 2 x 530 Watts RMS
Continous power rating, bridged at 4 Ohms .......................................................................................... 1 x 1060 Watts RMS
Frequency response ....................................................................................................................................... 10 Hz - 80 kHz
Total harmonic distortion (THD) ............................................................................................................................ < 0.0009 %
Total harmonic distortion (THD+N) ....................................................................................................................... < 0.0015 %
Signal to noise ratio ..................................................................................................................................................> 120 dB
Damping factor ............................................................................................................................................................ > 1000
Input impedance .....................................................................................................................................................10 kOhms
Input sensitivity ................................................................................................................................................... 1.0 V - 8.0 V
Internal fuse ................................................................................................................................................................... 120 A
Dimensions heatsink "Short" (H x W x D) ..............................................................................................53 x 237.5 x 433 mm
Dimensions heatsink "Long" (H x W x D) ..............................................................................................53 x 237.5 x 473 mm
Weight net version "Short" ............................................................................................................................................ 8.1 kg
Weight net version "Long" ............................................................................................................................................ 8.5 kg
TROUBLE-SHOOTING
The BRAX GX2000 is in protection mode and the Status-LED lights up yellow.
Cause:
The speaker wiring is faulty (short circuit between the wires or to the chassis of the vehicle).
Remedy:
Check the speaker wires or the speakers themselves for short-circuiting (p. 19 - 21).
The BRAX GX2000 is in protection mode and the Status-LED is flashing yellow.
Cause:
The internal fuses are burned.
Remedy:
Exchange the internal fuses - only 30 Ampere mini blade fuses are allowed.
The BRAX GX2000 is in protection mode and the Status-LED lights up red.
Cause:
The amplifier is overheated. Depending on the outside temperature it will take some time until the amplifier
is cooled down and switches on again.
22