Advertisement
CLEANING
With the Intelli-Mop™ Head, you can quickly and easily attach and release the Dirt Grip™
Pads without touching them. No more wrestling with dirty, wet pads. The Dirt Grip Pads
are double sided, washable and reusable. For pad attachment and removal instructions
see the following page.
USING YOUR LIFT-AWAY
PRO STEAM POCKET
MOP
®
®
Your Lift-Away Pro Steam Pocket Mop is ideal for deep cleaning and
cutting through dirt and grime in high-traffic areas, as well as for
sanitizing* floors.
*Sanitization studies were conducted under controlled test conditions.
Household conditions and results may vary. With the Intelli-mop head only in
HI mode. Not in above-floor mode or when using Steam Blaster™. See Owner's
Guide for instructions.
Plug the power cord into an outlet. The STEAM CONTROL button will flash blue.
Press the STEAM CONTROL button to
select your steam setting: once for LO,
twice for HI, and three times to place the
unit in STANDBY MODE.
INTELLIGENT STEAM CONTROL
®
IDEAL FOR
RECOMMENDED
SETTING
THESE SEALED
USAGE
SURFACES
Tools
Laminate
Light cleaning and dusting
Hardwood
Loosening and lifting light dirt
Marble
Cleaning delicate surfaces
Hardwood
Cleaning most surfaces and large areas
LO
Marble
Basic, everyday cleaning
Tile
Removing spots and smaller messes
Stone
Cleaning moderate and heavy-traffic areas
Deep cleaning and cleaning hard-to-clean surfaces
Hardwood
HI
Tough cleaning and removing stuck-on messes and stains
Marble
Deep cleaning heavy-traffic areas
Tile
Cutting through heavy dirt and grime
Stone
Sanitizing* floors
ABOVE-FLOOR CLEANING
Remove the Handheld Steamer by pressing the release button and pulling it away from the cradle.
Note: In Handheld Mode, the STEAM CONTROL is preset to HI to optimize above-floor
cleaning and garment steaming.
Snap the desired accessory into the main nozzle of the Handheld Steamer. Then squeeze the
steam trigger to activate steam.
Using 3-to-5-second bursts of the trigger will allow you to steam longer and with more control.
Once done with handheld steaming, press the STEAM CONTROL button until the light flashes
blue to put the unit in STANDBY MODE. Let cool for 2 to 3 minutes before removing mop
head, pads, or handheld accessories and storing.
CUSTOM CLEANING ACCESSORIES
HOW TO ATTACH
ACCESSORY HOSE
Slide Accessory Hose onto the Handheld
For spot cleaning and direct steaming
Steamer.
Slide the Garment or Upholstery Bonnet onto
the Garment Steamer. Elastic will hold the
bonnet in place.
GARMENT STEAMER
Freshen clothing, fabrics, and upholstery
Snap the bristle over the Garment Steamer
and bonnet then click the Garment Steamer
onto the Handheld Steamer.
Slide the pad onto the Small Above-Floor
Pocket Tool so it fits snugly. Cinch the elastic
SMALL ABOVE-FLOOR POCKET TOOL WITH PAD
band and slide the locking toggle to tighten.
Ideal for small, uneven surfaces. The pointed tip is
Connect the tool to the Accessory Hose by
great for edges and corners.
pushing firmly until it clicks into place, then click
the Accessory Hose onto the Handheld Steamer.
CAUTION: Make sure the Steam Mop is unplugged or in Standby Mode while attaching or
removing the accessories. Avoid touching the accessories, as they will be very hot after steaming.
It is recommended that you allow the pads to cool off before removing them from the
accessories to avoid possible scalding injury.
INTELLI-MOP™ HEAD TECHNOLOGY
TOUCH-FREE PAD ATTACHMENT
1
2
1. Lift the mop straight up by the handle
2. Slip the mop head's 4 corner tabs into the
until the Intelli-Mop Head is hanging
4 corner pockets of the Dirt Grip™ Pad.
straight down. Center the mop head
above the pad. Press down the release
buttons on the sides of the head post, and
both sides of the mop head will drop open.
3
4
3. Gently press the Intelli-Mop Head to the
4. Flip the other side of the Intelli-Mop Head
floor on one side of the pad, and that side
over onto the floor to click into place.
will click into place.
TOUCH-FREE PAD REMOVAL
1. Lift the mop straight up by the handle
until the Intelli-Mop Head is hanging
straight down. Press down the release
buttons on the sides of the head post, and
both sides of the mop head will drop open.
1
DIRT GRIP™ PADS
DOUBLE-SIDED, WASHABLE, REUSABLE
Our washable Dirt Grip Pads are made with fibers specially designed to absorb and trap dirt.
This gives your floors an amazing clean, with minimal streaking and short dry times.
For best cleaning results, we recommend replacing your
Dirt Grip Pads following 20 normal uses.
PAD CARE
Machine wash the Dirt Grip Pads separately with warm
water using liquid detergent.
NEVER USE BLEACH, POWDERED DETERGENT,
OR FABRIC SOFTENERS as they may damage
the Dirt Grip Pads.
You can purchase replacement Dirt Grip Pads and
other accessories by visiting sharkaccessories.com
or calling 1-800-798-7398.
STEAM BLASTER™ TECHNOLOGY
When you need an extra burst of steam to
clean tough, dried messes and stuck-on stains,
use the Steam Blaster.
1
1. Flip back the Intelli-Mop™ Head so that it is
behind the mop body.
2. Tilt the mop handle back. This will cause the
Steam Blaster to emit a concentrated blast
of steam onto the floor.
3. To stop the Steam Blaster spray, simply tilt
the mop handle forward.
3
4. Flip the Intelli-Mop Head back into its
original position and continue cleaning.
4
2
Advertisement
