Yealink T20P User Manual

Hide thumbs Also See for T20P:

Download this manual See also: Configuration Manual, Instructions

User Guide – Yealink T20P

YealinkT20P

Is a entry level IP Phone with high-definition audio, a broad range of voice codec's support. Its easy

to install and inexpensive from to start up for both enterprise and residential users.

These instructions are based on using the T20 in its factory default configuration, which obtains a

dynamic IP address automatically from your router using DHCP. For information on configuring your

T20 with a static IP address please refer to the T20 user manual.

For the purpose of this guide we will use the LCD Configuration and web interface to add an account.

The guide also assumes that you have connected the device to a proper power source, Ethernet

cable is connected from the device to switch / router and its obtained a LAN / WAN IP Address. If not

please check with your provider or system administrator and then proceed to below steps.

LCD Configuration

STEP 1 Click on the 'Menu' button

STEP 2 Choose "Settings" > "Advanced"

STEP 3 Enter your admin password, the default password is "admin"

http://www.virtualglobalphone.com

Dec - 2014

Page 1 User Guide – Yealink T20P YealinkT20P Is a entry level IP Phone with high-definition audio, a broad range of voice codec’s support. Its easy to install and inexpensive from to start up for both enterprise and residential users. These instructions are based on using the T20 in its factory default configuration, which obtains a dynamic IP address automatically from your router using DHCP.
Page 2 User Guide – Yealink T20P STEP 4 Choose which line to configure among line 1 and 2. STEP 5 Enter the following information Label: <VirtualGlobalPhone> Display name: (anything you want, can be your VirtualGlobalPhone number) Register name: <sip username>* Username: <sip username> * Password: <sip password>...
Page 3 User Guide – Yealink T20P STEP 5 Enter the following information: Line Active: Enabled Label: Anything you like to appear on the LCD of your phone Register Name: SIP account we provide (e.g. yealink12 / 0891112345) User Name: SIP account we provide (same as Register Name) Password: SIP password we provide Server Host: sip.virtualglobalphone.com...