Samsung AJ020NBNDEH User Manual page 44

Installation Procedure
Changing the addresses and options individually
When you want to change the value of a specific option, refer to the following table and follow the steps in Common
steps for setting the addresses and options on page 34.
Option SEG1
Function Page
Indication Details
Indication
and details
0
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option SEG1
Function Page
Indication 0
CAUTION
• If your indoor units support both cooling and heating, the mixed operation (two or more indoor units operate in
different modes simultaneously) is not available when the indoor units are connected to the same outdoor unit. If
you set an indoor unit as the master indoor unit by using the remote control, the outdoor unit automatically operate
in the current mode of the master indoor unit.
44
English
SEG2 SEG3
Type of the option to
Mode
change
Indication Details Indication
Option
D
type
SEG2 SEG3
Type of the option to
Mode
change
D 2
SEG4
Tens position of the
option number
Details Indication Details Indication
Tens
0 to F position 0 to 9 position
value
SEG4
Tens position of the
option number
1
SEG5 SEG6
Units position of the
New value
option number
Details Indication
Units
New
0 to 9
value
value
SEG5 SEG6
Units position of the
New value
option number
7 1
Details
0 to F