Samsung AJ020NBNDEH User Manual page 41

Setting an indoor unit installation option (suitable for the condition of each installation location)
• The indoor unit installation option are set to 020000-100000-200000-300000 by default.
• Set the indoor unit option by wireless remote controller. When entering Address option, connect remote controller
receiver.
Installation options
SEG1
0
SEG7 SEG8
1 Using of drain pump
SEG13 SEG14
Use of external
2
SEG19 SEG20
Individual control
3
with remote control
• Even if you set the Use of drain pump (SEG8) option to 0, it is automatically set to 2 (the drain pump is used with 3
minute delay).
• If you set the Maximum filter usage time (SEG18) option to a value other than 2 and 6, it is automatically set to 2
(1000 hours).
• If you set an option to a value that is out of range specified above, the option is automatically set to 0 by default.
• The external output of SEG15 is generated via MIM-B14 connection. (Refer to the manual of MIM-B14.)
• If you set the Individual control with remote control (SEG20) option to a value other than 0 to 4, it is automatically set
to 0 (Indoor 1).
SEG2 SEG3
2 Reserved
SEG9
Reserved
SEG15
Setting the output of
control external control
SEG21
Heating setting
compensation offset
SEG4 SEG5
Use of external
Use of central control
temperature sensor
SEG10 SEG11
Reserved Reserved
SEG16 SEG17
S-Plasma ion Buzzer Control
SEG22 SEG23
Dew removal
Motion detection
operation in wind free
sensor
mode
SEG6
Compensation of the fan RPM
SEG12
Remote control
SEG18
Hours of filter usage
SEG24
Reserved
41
English