Batteries - ION FirstCheck+ 2000 User Manual

Ion Science Ltd
FirstCheck+ 1000, 2000, 3000 & 5000 Ion Science Ltd

Batteries

Note: Ion Science recommends keeping your FirstCheck+ on charge at all times when not in use, as
batteries can loose power over time. Loss of battery power can result in the instrument‟s charge indicator
showing a non-charging status when trying to charge the unit. If this occurs, leave the charger connected
for two minutes, then remove and reconnect the charger as soon the timer symbol disappears. You will now
see the instrument charge as normal.
WARNING:
For reasons of Intrinsic Safety, batteries MUST NOT be charged or replaced within potentially flammable
areas. Ensure you are in a SAFE area before carrying out any type of maintenance on your PhoCheck+
instrument.
Instrument battery type identification
Non-rechargeable and rechargeable FirstCheck+ Instruments have a removable battery cover on the rear of
the handle area/ A security tool is required to remove it.
Non-rechargeable battery types to be used
For Intrinsic Safety of T4 rating and reduced risk of explosion you must only use Duracell Standard, Procell
Alkaline, Zinc Carbon R6, R6B, or R6PP batteries. DO NOT mix old / used batteries or batteries from different
manufacturers. The charger socket cannot be used while dry cell batteries are fitted. Batteries should only
be changed in a non hazardous environment.
Rechargeable battery instruments*
Ensure rechargeable PhoCheck+ instruments are charged for at least 12 hours before using it for the first
time. To ensure optimum charging the charger should be attached to the FirstCheck+ when the instrument
is switched off. The instrument should be charged in a non hazardous environment only.
When the battery power is very low the following symbol will appear.
NB: Only use the charger supplied with your FirstCheck+ to charge your instrument.
Page 32 of 45