Table of Contents
Advertisement
FirstCheck+ 1000, 2000, 3000 & 5000
Instrument Menu
Application - Survey Mode
'SURVEY' is the default mode of operation whenever the 'Health & Safety' mode is NOT selected. All
functions can be adjusted or selected in this mode unless the 'Security mode' is set via the 1stPC software.
'Survey' mode is often used in applications where several areas (or Zones) can be monitored and readings
data logged. Saved data can then be downloaded to a PC for long-term storage and review. High and low
alarm levels can be set.
Security
When the FirstCheck+ is connected to a PC via the FirstCheck+ software package (see pg 27), the
instrument can be locked in the Application Settings area of the software package.
This facility allows the instrument to be set-up by a qualified or competent person, locked and then handed
to an operator for use. When in secure mode the FirstCheck+ functionality cannot be changed or adjusted.
The user can only view the display screens and switch the instrument ON and OFF. To connect the
Firstcheck+ to the PC software when this mode is active, the instrument must be OFF, then switched ON
while it is placed in front of the Infra-red device.
Ion Science Ltd
Page 22 of 45
Ion Science Ltd
_
Advertisement
Table of Contents
