System Maintenance
This system needs no specific maintenance beyond remote control
battery replacement. The remote is powered by one 3V CR2032
battery.
Battery Replacement
Using a small slotted (flat-head) screwdriver, insert into the
1.
slot located along the edge of the remote control and care-
fully pry the unit open.
Turn unit over and carefully remove rear housing. Remove
2.
the battery from holder and replace with a new one.
3.
Reassemble all parts and snap together.
Note: Verify that the battery polarity is correct when replacing.
Battery Disposal
Directed cares about the environment. If you need to
dispose of the battery, please do so in accordance
with your municipal requirements for battery disposal.
12
© 2017 Directed. All rights reserved.