Installation Instructions - Motorola Spectrum Series Installation Manual

Mobile Antenna Installation
Mini-UHF Connector Installation #28-84606M01

Installation Instructions

Use Motorola tool part # 66-80388A26 (Refer to
1. Slip ferrule and collar onto cable. See
2. Prepare cable to strip dimensions as per
3. Insert stripped cable into plug body until conductor is exposed (front end) and dielectric
bottoms inside body. See
4. Crimp center contact using crimp area C of
crimping at the tip. Refer to
5. Push collar forward onto plug assembly. Fit cable braid over support sleeve of connector. See
Figure
6. Push ferrule over braid until flange butts against connector body. Refer to
the correct crimp area of tool, crimp ferrule close to plug body. Crimp ferrule for a second time
close to cable end.
7. Protuding center conductor should be trimmed with end of center contact.
Figure
Figure
10.
FIVE CRIMP AREAS
A
B
C
D
E
Figure 8. Motorola Crimping Tool 66-80388A26
Figure 8).
Figure 10.
Figure 11.
10.
Figure 8 . Crimp at base of center contact, avoid
9.
.256
.319
.051
.068
.213
9
Figure 10. Using