Tips For Best Results - Remington F9200 User Manuals

Turbo mode
• During use, pressing the on/off button a second time increases the motor speed to
provide a more powerful shave. This is ideal for shaving facial hair that is 2-3 days old,
or heavier parts of the facial hair. When activated, TURBO will be shown on the
display.
Using the pop-up intercept trimmer
The pop-up intercept trimmer has three positions and can be raised or lowered to suit
the shaving task:
• Fully down - use this position when shaving light facial hair.
• Level (trimmer level with the foils) - in this position the trimmer acts as an extra
cutting element.
• Fully up - use this position for detail trimming.
Head lock
Normally, the head pivots freely but its movement can be restricted by sliding the head
lock button to the LOCK poition.
Switching off
• Press the on/off button (several times if required) until your shaver stops.
Travel lock
The travel lock prevents your shaver from accidentally switching on when it is packed in
luggage.
To lock: Press and hold the on/off switch for three seconds. Your shaver will start for three
seconds and then switch off. The L icon will flash five times.
To unlock: Press and hold the on/off switch for three seconds. After three seconds your
shaver will turn on.

TIPS FOR BEST RESULTS

• Always hold the shaver at right angles to the skin so that the shave head is touching
the skin with equal pressure.
• Use slow to moderate stroking movements. The use of short linear motions in
stubborn areas may obtain a closer shave, especially along the neck and chin line.
• DO NOT press hard against the skin in order to avoid irritation and damage to the
intercept heads.
Shaving with shaving gel or foam
• Follow the same instructions as dry shaving if using shaving gel.
• After use with shaving gel, please ensure the head and cutters are rinsed under
warm water to clean away any excess gel and debris.
6