Troy-Bilt 31AS6BN2711 Fast Start Manual

Table of Contents

Download this manual

Read and understand all instruction, warning and danger labels.

Chute

Place chute over base and close ﬂange keepers (3).

Pivot handle upward.

Keepers will click into place when properly secured.

Remove ﬂat washer and hairpin clip.

Insert chute control rod into bracket as

Tighten wing knobs.

shown. Secure with washer and clip.

Call 1-888-TO-HELP-U

Need Help?

(1-888-864-3578)

778-10555A

IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND

FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .

Table of Contents

Do you have a question about the 31AS6BN2711 and is the answer not in the manual?

Page 1 Remove ﬂat washer and hairpin clip. Insert chute control rod into bracket as Tighten wing knobs. shown. Secure with washer and clip. Call 1-888-TO-HELP-U Need Help? (1-888-864-3578) © 2005 31AS6BN2711 778-10555A IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Page 2 Read and understand all instruction, warning and danger labels. Gas Cap Primer Choke Throttle Need Help? Call 1-888-TO-HELP-U (1-888-864-3578) IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .