Ryobi RSH2400R Operator's Manual

Ryobi RSH2400R Operator's Manual

2400w impact shredder
Hide thumbs Also See for RSH2400R:

Advertisement

RSH2400R
2400w IMPACT SHREDDER
OPERATOR'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RSH2400R and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ryobi RSH2400R

  • Page 1 RSH2400R 2400w IMPACT SHREDDER OPERATOR’S MANUAL...
  • Page 2: General Safety Rules

    ENGLISH WARNING: 3) Wear ear protection and safety glasses at all times To reduce the risk of injury, the user while operating the machine; must read and understand the operator ’s 4) Avoid wearing clothing that is loose fitting or that has manual before using this product.
  • Page 3: Maintenance And Storage

    ENGLISH NOTE: If a molded plug is fitted and has to be removed GENERAL SAFETY RULES take great care in disposing of the plug and severed cable. It must be destroyed to prevent engaging in a )Do not tamper with the power source govenor socket.
  • Page 4: Warning Symbols

    ENGLISH WARNING SYMBOLS The following warning symbols/pictograms are found on the appliance. SYMBOL EXPLANATION WARNING! Read operator’s manual WARNING! Switch the tool OFF and disconnect from the mains supply before making adjustments, cleaning blockages, or starting any cleaning and maintenance procedures. WARNING! Keep bystanders away WARNING!
  • Page 5: Technical Data

    ENGLISH TECHNICAL DATA DESCRIPTION Type Model No..........RSH2400R Figure 1 Voltage..........230-240VAC 50Hz . Feeding chute Rated Power......2400W (S6-40%) 2200W (S) 2. Shredder body NOTE: 3. Cover locking knob . The S6-40% indicates a load profile of 4 min load and 4. Discharge chute 6 min idle time.
  • Page 6 ENGLISH ASSEMBLY to allow the nuts to tighten on each end of the axle. FITTING THE TRANSPORTATION WHEELS FITTING THE LEG WARNING! . Turn the shredder over onto its front to reveal the You may need assistance when lifting the wheel support fixing holes on the underside of the machine out of the box and assembling.
  • Page 7: Clearing Obstructions

    ENGLISH SHREDDING GUIDE is lock housing, and the second is pulling on the switch. But, when the first step is finished, you must push the button down and at the same time whirl the button, like 2. Position a collecting box or other collecting device that the button will close.
  • Page 8: Care And Maintenance

    ENGLISH If necessary, use the plunger provided to push the waste 3. Do not allow material to become dry and hard on any material down into the feeding chute. of the garden shredder surfaces. This will directly affect the shredding performance. 4.
  • Page 9: Troubleshooting

    ENGLISH TROUBLESHOOTING PROBLEM CAUSE ACTION The motor does not The overload protection has responded. Press the reset button, and press the switch “”. Check the power supply cable, the plug and Power failure the house fuse. Press the switch marked “O” to stop the motor. Pull the material from the feed funnel.
  • Page 10: Limited Warranty

    We,Homelite Far East Co., Ltd 24/F, CDW Building, 388 Castle Peak Road, Tsuen Wan, Hong Kong, declare under our sole responsibility that the product electrical shredder: RSH2400R, to which this declaration relates correspond to the relevant basic safety and health requirements of Directive:...
  • Page 11 RYOBI TECHNOLOGIES (UK) LIMITED. RYOBI TECHNOLOGIES GMBH Medina House, Itterpark 4 Fieldhouse Lane, Marlow, D-40724 Hilden Buckinghamshire, DEUTSCHLAND SL7 TB, Tel: + 49 (0) 203 2958-0 UNITED KINGDOM Fax: + 49 (0) 203 2958-29 Tel: + 44 (0) 628 894400...

Table of Contents