Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ryobi RGS-1240
Summary of Contents for Ryobi RGS-1240
- Page 1 RGS-1240...
- Page 2 - 1 -...
- Page 3 Button Foot A Foot B Fig. 1 Fig. 2 Wheel Wheel Axle Bush Spacer Screw Cover Fig. 3 Cover Knob Cover Knob Reset ON/OFF Switch Switch Fig. 4 Fig. 5 Flat push stick Fig. 6 Fig. 7 - 2 -...
- Page 4 Fig. 8 Fig. 9 - 3 -...
-
Page 5: General Safety Rules
• Cord replacement should only be carried out by an authorised • Do not operate the machine on a paved or gravel surface where person or by a Ryobi authorised service centre. ejected material could cause injury. • It is recommended that the shredder should be used with a Residual Current Device (RCD) with a tripping current of no more than 30mA. -
Page 6: Specifications
WARNING! DESCRIPTION Long material extending out from the machine could lash out 1. Feed hopper 7. Feet when being drawn in by the blades. Please keep at safe distance. 2. Shredder body 8. Flat push stick 3. Motor cover ON/OFF switch 8. - Page 7 WARNING! 6. Remove deposited matter from the machine using a brush. Never slacken off the tightening knob without having turned off 7. Always clean the machine after use. Clean the plastic body the On/Off switch and pulled the plug out off the socket. and plastic parts using soap and a moist cloth.
Need help?
Do you have a question about the RGS-1240 and is the answer not in the manual?
Questions and answers
Who can sharpen the blades on the RGS- 1240.
Only an experienced person using an oil stone can sharpen the blades on a Ryobi RGS-1240.
This answer is automatically generated