Attachment With Type 4708-54 Supply Pressure Regulator - Samson 3710 series Mounting And Operating Instructions

4.5 Attachment with
Type 4708-54 Supply Pres-
sure Regulator
Required accessories: Bolts with special nuts
(1400-7806) (1 in Fig. 6)
1. Screw special nuts (1) into the holes in
the reversing amplifier.
2. Insert gasket (3) into the recess of the
supply pressure regulator and slide the
special hollow bolts (2) into the holes for
Output and Supply.
3. Position reversing amplifier and fasten
using the hollow bolts (2).
Fig. 6: Mounting the reversing amplifier onto Type 4708-54 Supply Pressure Regulator
EB 8392 EN
1
3
Attachment to positioners and limit switches
Fig. 5: Reversing amplifier with supply
pressure regulator mounted onto
positioner and rotary actuator
1 Special nuts
2 Hollow bolts
3 Gasket
2
11