Air Flow Setting Mode - Equinox Systems EQ-TM- 4001 User Manual

Time constant setting mode operation:
to into time const a nt setting mode.
1. Press
2. In the setting the time constant setting mode
that can press , ,
change the digit and press

13. AIR FLOW SETTING MODE

Press button to select Area and press
button to into the air flow setting mode and press
to exit the air flo w setting mode.
Air flow setting mode operation:
1. Press button or
selected Area or the area of a circle, square
area, and press button to int o setting the
size of area.
2. In the setting the size of area that can press
, , , button to ch ange the digit
and press to confirm.
14. DATA H OLD
Press button to enable or disable hold
function.
? The HOLD function will be unavailable if
calibration function is enabled.
, button to
to confirm.
button to
Velocity and Absolute Pressure Display.
WE T: Wet bulb temperature indication.
DEW : Dew point temperature indication.
%RH: humd i ity indication.
ºC: Degree Celsius.
ºC: Degree Fahrenheit.
hPa: Hectopa scal indication.
inHg: Inch of mercury .
mmHg: Millim eter of mercury.
CF M: Cubic feet per minute.
CMM: Cubic meters per minute.
2/3V MAX : 2/3 V Maximum mode is selected
indication.
× 10: Multiply reading by ten
× 100: Multiply reading by hundred.
× 1000: Multiply reading by thousand.
Third window: Air flow setting and record display
Sampl e : Sampling indication.
INT V: Sample interval indication.
Are a: Duct area indication.
T C: Average time constant indication.
A VG: Average mode is selected indication.
K: Number of records b y one thousand.
[ ]: Round duct diameter dimension