Mounting And Wiring; Site Requirements - Unicont DTS-100 User Manual

3. Mounting and wiring

This chapter shortly describes how to mount and wire UNICONT
DTS-100 system. It is recommended to read this chapter thoroughly
before mounting the system.

3.1. Site requirements

When planning the installation of the UNICONT DTS-100 system, choose a site
that meets the following requirements:
- Select a location that minimizes cable lengths.
- The equipment should not be exposed corrosive fumes, dust, or strong
magnetic fields such as those generated by motors and copying machines.
- Select a location for the system that has enough space for ventilation.
- The equipment should not be exposed to direct sunlight. The equipment
must be located in an environment that will maintain a temperature range
of 0 ~ 40°С and a humidity range of 10% ~ 90% non-condensing. The
location should have adequate lighting and ventilation, and should be dry and
clean.
Overall and mounting dimensions of the case are given at Fig 5
10
UNICONT DTS-100