Ryobi TS1350 Operator's Manual page 10

CARRYING HANDLE
See Figure 3.
For convenience when carrying or transporting your miter
saw from one place to another, a carrying handle has been
provided on top of the saw arm as shown in figure 3. To
transport, turn off and unplug your saw, then lower the saw
arm and lock it in the down position. Lock saw arm by
depressing the lock pin.
MITER LOCK HANDLE
See Figure 3.
The miter lock handle securely locks your saw at desired
miter angles.
SPINDLE LOCK BUTTON
See Figure 4.
A spindle lock button has been provided for locking the
spindle which keeps the blade in your saw from rotating.
Depress and hold the lock button while installing, changing,
or removing blade only.
TRIGGER LOCK
See Figure 5.
To prevent unauthorized use of your compound miter saw,
we suggest that you disconnect it from the power supply and
lock the switch in the off position. To lock the switch, install
a padlock (not included) through the hole in the switch
trigger. A lock with a long shackle up to 17/64 in. (6 mm)
diameter may be used. When the lock is installed and locked,
the switch is inoperable. Store the padlock key in another
location.
SAW
ARM
MITER LOCK
HANDLE
SAW ARM
LOCKED IN DOWN POSITION
FEATURES
CARRYING
HANDLE
LOCK
PIN
Fig. 3
Page 10
SWITCH
TRIGGER
SPINDLE
LOCK BUTTON
SWITCH
TRIGGER
Fig. 4
PADLOCK
Fig. 5