Makita DUH551 Instruction Manual page 6

Tool/ battery protection system
conditions. In some conditions, the indicators light up.
Overload protection
When the tool is operated in a manner that causes it to
tool off and stop the application that caused the tool to
Overheat protection for tool/ battery
start even if pulling the switch trigger. In this situation,
NOTE:
1
1. Star marking
Overdischarge protection
1.
lights up about 10 seconds. In this situation, charge the
Handle mounting positions
-
CAUTION:
the desired position before operation.
1
1. Knob 2. Housing
turn the handle, pull the knob and turn the handle as
and turn the handle more.
Switch action
CAUTION:
position when released.
1
1
1. Switch trigger B 2.
button
when pulling the both switch triggers.
6 ENGLISH
2
2
3
3. Lock-off