Makita DUH551 Instruction Manual page 10

Removing the shear blades
Reverse the tool and loosen four screws.
1
1. Blade cover 2. Screws
NOTE:
is applied in the shear blade driving area.
Remove the under cover.
1
1. Under cover 2. Blade cover 3. Screws
Remove the plate.
1
1.
slotted screwdriver.
2
3
2
1
1. Crank
Remove two screws from the shear blades and the
shear blade unit will be taken out.
1
2
1. Screws 2. Shear blade
CAUTION:
• Return the gear to the original position in such
a manner as it was installed if it should be taken
10 ENGLISH