Install Dsn-610/Dsn-640 In Dsn-6X10 Subsystem - D-Link DSN-610 Quick Installation Manual

Iscsi ip san storage, 1gbe/ 10 gbe iscsi to sata / sas raid controller

Hide thumbs Also See for DSN-610:

Table of Contents

Install DSN-610/DSN-640 in DSN-6x10 subsystem

This following procedure applies to upgrading from DSN-6110 to DSN6120 as well as from

DSN-6410 to DSN-6420. Before you do this, please make sure that either DSN-6110 or

DSN-6410 is properly installed according to the manuals.

Before you can insert the second controller to the IP SAN storage, the IP SAN storage

system should be up and running and the maintenance\system page of the GUI should

look like the following screenshot.. Note that the status is single as you have one

controller only.

You can also verify controller mode in "Maintenance\Upgrade". Check out the "Controller

Mode" section.

Table of Contents

Do you have a question about the DSN-610 and is the answer not in the manual?

Dsn-640