Makita DUX60 Instruction Manual page 10

Main power switch
WARNING:
Always turn off the main power
switch when not in use.
Fig.4: 1.
NOTE:
NOTE:
switch is turned on.
Switch action
WARNING:
For your safety, this tool is
equipped with lock-off lever which prevents the
tool from unintended starting. NEVER use the tool
if it runs when you simply pull the switch trigger
without pressing the lock-off lever. Return the
tool to our authorized service center for proper
repairs BEFORE further usage.
WARNING:
NEVER tape down or defeat pur-
pose and function of lock-off lever.
CAUTION:
Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
NOTICE:
Do not pull the switch trigger hard with-
out pressing the lock-off lever. This can cause
switch breakage.
Fig.5: 1. 2.
speed will change.
Fig.6: 1.
Indicator
Reverse button for debris removal
WARNING:
Switch off the tool and remove
the battery cartridge before you remove entan-
gled weeds or debris which the reverse rotation
function can not remove.
gled in the tool.
Fig.7: 1.
NOTE: During the reverse rotation, the tool operates
stops.
NOTE: Once the tool is stopped, the rotation returns
NOTE:
Electronic torque control function
rotation speed and then turn the tool on.
NOTE:
10 ENGLISH
Mode
High
Medium
Low
-