Advertisement
FTA 4400 – Egg Fryer
1. The Egg Fryer has a specially constructed tank fitted into the griddle
plate surface.
2. The temperature of the oil can be thermostatically regulated between
60ºC - 190ºC (140ºF - 374ºF ).
The remainder of the instructions are as per the FTA 1600 griller
above.
FTA4600, FTA4600HK, FTA0900
1. FTA 4600, FTA4600 HK and FTA0900 grillers require a suitable single,
two or three phase connection back to a distribution board. Please
contact a qualified electrician for this installation. N.B. The FTA 4600
HK is fitted with two power-cords for connecting to 230VAC single-
phase supply.
2. The 900mm griller (FTA 0900) is equipped with three thermostats.
For accurate temperature control of the three heating zones, whilst
the 600mm griller (FTA 4600) is fitted with two thermostats for the
independent control of the two heating zones. The red pilots light will
go out when the desired temperature is reached in each section.
TIP : COOKING AT A HIGHER TEMPERATURE
WILL NOT REDUCE YOUR COOKING TIME !
IT WILL PRODUCE UNSATISFACTORY RESULTS.
3
MODEL: 400mm EGG GRILLER
MODEL CODE : FTA4400 R04
Part
No.
1
BODY ASSEMBLY
2
THERMOSTAT
3
CONTROL PANEL FACIA
4
PILOT LIGHT
5
CONTROL KNOB
6
CONTROL PANEL INSERT
7
ANVIL AXIS LOGO
8
ELEMENT CLAMPING BRACKET
9
BOTTOM COVER
10
ELEMENT COVER
11
INSULATION PAD
12
ELEMENT
13
DRIP TRAY HOLDER
14
PERFORATED TRAY
15
ADJUSTABLE FEET
16
CABLE GRIP
17
POWER CORD
18
TERMINAL BLOCK
19
400MM EGG GRILLER TOP ASSEMBLY
20
1/4 BALL DRAIN VALVE
Description
28
Advertisement
