Advertisement
UNPACKING
Unpack the product and check for any damage incurred during
transit. This should be reported to the responsible carrier, railway or
postal authority, and a request for a damage report should be made.
THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO
GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR
PROTECTING AGAINST LOSS FROM CONCEALED DAMAGE.
THE FORM FOR FILING SUCH A CLAIM WILL BE PROVIDED
BY THE CARRIER.
GENERAL INSTALLATION AND OPERATION INSTRUCTIONS
1.
Before using the griller, turn the knob to maximum temperature.
Allow the griller to burn in for +/-30 minutes. You will notice smoke
appearing due to the protective coatings burning in. This is normal.
2.
After the burning in period has lapsed, turn the temperature con-
trol knob down to the desired operating temperature. Grease
plates generously with butter or oil.
3.
Never allow excess fat or oil to build up as this will result in the
building up carbon on the plates. This can be removed with a
scraper or grill brick.
4.
The griller is provided with adjustable feet to enable the slope of
the griller plate to be set towards the fat drain tray.
1
MODEL: 600mm FLAT TOP ELECTRIC GRILLER
MODEL CODE : FTA4600 R02
Part
No.
1
BODY ASSEMBLY
2
GRILLER THERMOSTAT
3
CONTROL PANEL FACIA
4
PILOT LIGHT
5
FACIA PANEL INSERT
6
CONTROL KNOB
7
GRILLER FAT TRAY
8
ANVIL AXIS LOGO
9
ELEMENT CLAMP
10
PROBE CLAMP
11
BOTTOM COVER
12
ELEMENT COVER
13
INSULATION PAD
14
GRILLER ELEMENT
15
FAT TRAY SHIELD
16
ADJUSTABLE FEET
17
3 PHASE CONNECTOR BLOCK
18
GRILLER TOP ASSEMBLY
Description
30
Advertisement
