Ryobi RE170VS Operator's Manual page 23

EXTENSION CORD CAUTION
When using a power tool at a considerable distance from a power
source, be sure to use an extension cord that has the capacity to
handle the current the tool will draw. An undersized cord will cause
a drop in line voltage, resulting in overheating and loss of power.
Use the chart to determine the minimum wire size required in an
extension cord. Only round jacketed cords should be used.
When working with a tool outdoors, use an extension cord that is
designed for outside use. This is indicated by the letters "WA" on
the cord's jacket.
Before using any extension cord, inspect it for loose or exposed
wires and cut or worn insulation.
• SERVICE
Now that you have purchased your tool, should a need ever exist for repair parts or service,
simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent
facts when you call or visit. Please refer to the Service Center insert or call 1-800-525-2579
in the United States or 1-800-265-6778 in Canada for your nearest Ryobi Authorized Service
Center. You can also check our web site at www.ryobi.com for a complete list of Authorized
Service Centers.
• MODEL NO.
The model number of your tool will be found on a plate attached to the motor housing. Please
record the model number and serial number in the space provided below.
• MODEL NUMBER RE170VS
• SERIAL NUMBER
RYOBI TECHNOLOGIES, INC.
1428 Pearman Dairy Road
Post Office Box 1207
Phone 1-800-525-2579
972000-774
OPERATOR'S MANUAL
ROUTER - RE170VS
DOUBLE INSULATED
Anderson SC 29625
Anderson SC 29622-1207
**Ampere rating
0-2.0 2.1-3.4
(on tool data plate)
Cord Length Wire Size (A.W.G.)
25' 16 16
50' 16 16
100' 16 16
CAUTION: Keep the extension cord clear of the working
area. Position the cord so that it will not get caught on lumber,
tools or other obstructions while you are working with a power
tool.
RYOBI TECHNOLOGIES, INC.
Cambridge, Ontario N1R 6K2
3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
16 16 14
16 14 14
14 12 10
**Used on 12 gauge - 20 amp circuit.
P.O. Box 910
Phone 1-800-265-6778
Printed in U.S.A.
14
12
—