Table of Contents
Advertisement
EN
Juice Dispenser FSD4000
5.2 Installation and connection
WARNING
During the installation ensure not to tip over the juice dispenser. The excessive
weight of the juice dispenser can cause severe injuries.
CAUTION
Ensure to wear safety gloves during the installation. Sharp corners on the sheet
metal and on the components of the equipment bear an inherent risk of cutting
injuries to hands and fingers.
In order to connect the dispenser, a 230 V/50 Hz point and a 10 A fuse is required.
Align the juice dispenser horizontally – if necessary, the adjustable feet can be used to ad-
1
just the height.
Install drip tray and drip grid.
2
In order to provide the highest degree of quality, depending on the prevailing water quali-
3
ty, we recommend to use a water filter, e.g., Everpure.
Use the water hose (supplied) to connect the juice dispenser to the main water supply line.
4
The dispenser comes with a 1.5 m long, 3/4" – 3/8" flexible water hose.
IMPORTANT
Ensure the water pressure ranges between 3 to 4 bar!
IMPORTANT
If using any other type of hoses or extensions, ensure that they are approved for
drinking water and are resistant to the applicable pressure.
Open the water supply line inside the dispenser in order to fill the line with water!
6
22
Subject to technical change without prior notice! Version 2.0, 11/2017
© K. & M. Holland GmbH
Advertisement
Table of Contents
