Table of Contents
Advertisement
© K. & M. Holland GmbH
2.8 Intended use
The juice dispenser is designed for a specified climate class (N: ambient temperatures of +16
to +32 °C, relative humidity up to the max. 75%). The equipment is intended to be used exclu-
sively indoors.
Keep the door open only as long as possible. Otherwise, the temperature inside the refrigera-
ted area will rise. Increased temperatures cause the unnecessary operation of the compressor,
and therefore, increase the power consumption.
Do not cover air intakes and exorcist openings. Otherwise, a sufficient air flow cannot be gua-
ranteed. Furthermore, the power consumption increases, and damage to the components may
be unavoidable.
NOTE
The manufacturer cannot be held liable for damage caused due to non-compliance
with safety information and warnings.
2.9 Personal Protective Equipment
During the assembly/disassembly of the juice dispenser, we recommend the following perso-
nal protective equipment:
Safety gloves
n
Safety boots
n
2.10 Responsibility of the owner
It is the responsibility of the owner to employ only personnel to work with the juice dispenser
who
are familiar with the basic regulations pertaining to safety at the workplace and the preventi-
n
on of industrial accidents
have been introduced to all aspects pertaining to working with the juice dispenser
n
have read and understood this Operating Manual
n
It is the responsibility of the owner to install the juice dispenser in a manner that allows unobs-
tructed access for the care and maintenance of the equipment.
Subject to technical change without prior notice! Version 2.0, 11/2017
Juice Dispenser FSD4000
EN
13
Advertisement
Table of Contents
