Download Print this page

LOCKEY C150 Installing Manual

Cabinet hookbolt lock

Advertisement

Quick Links

Overview
The C150 Cabinet Hookbolt Lock mounts on both sides of a door.
The striker plate mounts on the inside door frame.
Like a standard deadbolt lock, you can freely lock or unlock the
C150 from the inside, but you must have enter the code to open
the lock from the outside.
Unlike a standard deadbolt lock, the hookbolt does not retract
inside the door. Instead, it slides back and forth along the inside
surface, so that makes the C150 a surface mount lock.
Unlike a standard deadbolt lock, you can lock the C150 from
outside without knowing the combination.
The lock does not affect or replace any other mechanism you
may already have installed on your door.
What Type of Door Do You Have?
You can use the C150 Cabinet
Hookbolt Lock in any of the ten
situations shown in the
diagram. Decide which
situation most closely
represents your installation.
The door and door frame are
shown white with black outline,
C150 lock and striker plate are
black, and door molding and
hinge are gray. Arrow shows
which way the door opens. The
of each drawing is inside the
room, bottom is outside. Notice
you can turn the knob
clockwise, but not counter-
clockwise.
The Keyless Locks Store
PO Box 4133
Wheaton, IL 60189-4133
We wish to thank Dan Connors for writing this document to help other customers.
Installing a C150 Cabinet Hookbolt Lock
Additional Notes
C-150 viewed from
inside in locked position
C-150 viewed from inside in
unlocked position
Toll Free: (866) 586-0131
Fax: (630) 447-3635
www.KeylessEntryLocks.com
Email: lockorders@keylessentrylocks.com
the
top
that

Advertisement

loading

Summary of Contents for LOCKEY C150

  • Page 1 The striker plate mounts on the inside door frame. Like a standard deadbolt lock, you can freely lock or unlock the C150 from the inside, but you must have enter the code to open the lock from the outside. Unlike a standard deadbolt lock, the hookbolt does not retract inside the door.
  • Page 2 Left-Handed Installations If your door is like any of the five drawings on the left side of the previous diagram, you will need to make a quick adjustment before installing your lock. Do the following to the outside lock (the one with the push buttons). Use a #1 Phillips and remove the two blue screws from the small plate near the bottom back.
  • Page 3 If you press a button that is not part of the combination or if you do not press a button that is part of your code, the C150 will not open.
  • Page 4 That’s all there is to it. Installing the C150 on a Pocket Door Close the pocket door and, from the inside, position and install the striker plate on the door frame using two small screws.