Using The Microphone - Sennheiser e 602-II Instruction Manual

Using the microphone

Positioning the microphone on a kick drum
Mount the e 602-II using the integral stand mount
X
Pos. Resulting sound
B.1 • much attack
• little resonance
• dry
B.2 • less attack
• much resonance
• smooth and voluminous
B.3 • less Attack
For less attack in all three positions, turn the microphone away from
where the beater strikes.
Positioning the monitor loudspeakers
To prevent feedback and crosstalk, postion your monitor loudspeak-
X
ers in the angle area of the highest cancellation of the microphone
(approx. 180°).
Cleaning and maintaining the e 602-II
Caution Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a
short-circuit and damage the electronics.
Keep all liquids away from the product.
X
Do not use any solvents or cleansing agents.
X
Unscrew the sound inlet basket
X
Remove the foam insert from the sound inlet basket
X
Use a slightly damp cloth to clean the sound inlet basket
X
the inside and ouside.
Reinsert the foam insert into the sound inlet basket
X
the sound inlet basket on the microphone and screw it tight.
Commentary
Position the microphone at a
distance of a few centimeters
from the batter head.
Position the microphone at the
level of the resonant head.
Position the microphone in the
middle between the batter head
and the resonant head.
.
1
B
C .
1 .
1 from
1 and replace
3