Table of Contents
Advertisement
High-End type wind solar hybrid
controller user manual
Safety
Type:JW-MPPT
1. Please keep and read the instructions carefully during installation and carefully
version: 2.0
before using the product.
2. Experienced technical personnel must install, and the installation process
must be in strict accordance with the user manuals to ensure that the product
works normally.
3. This product should avoid long-term exposure to corrosive gas and moist
environments.
4. Never place this product in damp, rain, exposure to the sun, serious dust,
vibration, corrosion and strong electromagnetic interference.
5. Do not open this product or repair the shell.
2
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JNGE Power JW1230
Summary of Contents for JNGE Power JW1230
- Page 1 High-End type wind solar hybrid controller user manual Safety Type:JW-MPPT 1. Please keep and read the instructions carefully during installation and carefully version: 2.0 before using the product. 2. Experienced technical personnel must install, and the installation process must be in strict accordance with the user manuals to ensure that the product works normally.
- Page 2 Ⅰ. Product overview Directory The controller is designed specifically for wind solar hybrid street light system, can make the wind solar hybrid street light system of various resources to Ⅰ. Product overview...............3 achieve the best configuration, of course, the controller with some simple Settings can also be used in household system.
- Page 3 otherwise may cause permanent damage to the equipment;2. In the power speed (optional) supply does not have enough electric power support is likely to appear when Choose the big size LCD display, all parameters can directly visible battery power is rarely lead to load can not have normal work, so we also need to The humanized keys operate function, all of the parameters according to the improve power generation capacity in this situation.
- Page 4 Ⅳ.Operating instructions resistance size（mm) The controller to operating personnel must be a range of electrical theory Power L1± 5 L2± 5 L3± 5 H1± 2 H2± 5 knowledge and practical experience of technical personnel,and strictly in accordance with relevant provisions of the manual steps and manner. 300W 1.Install 500W...
- Page 5 to the controller, and please pay attention to the distinction between positive and (2)Button instructions negative electrode, if the positive and negative connection errors may cause permanent damage to the load, because you do not necessarily have protection against reverse loads.The controller can connect two road load, if there are two road load needs to connect, please positive screwed together two loads connected to the controller L+ terminal and the negative electrode are connected to the controller L1-, L2- terminals.After connection, observe whether the load is...
- Page 6 will disappear;For discharge, when the battery is in a state of under-voltage, above. flashing the overall effect, when the battery is in good state, according to static effect, marking can pick up the load, after loading,if there are current,will display effect.
- Page 7 time value;according to the method described in this section, switch to the seventh, data area shows XXX (0-100), labeled Pfirst, user can press the up and down key changes value, each time you press the increase or decrease 10, the power value for XX % of full power.Street light model second time Tsecond power Psecond, set up means the same as the first time.
- Page 8 Working Temperature -25℃~+55℃ ≤5500m(2000m above the need to reduce power use) Height Ⅸ.Technical Parameters Environment humidity 0~90%，No condensation model JW1230 JW2430 JW2450 JW2460 Net Weight 1.20KG Rated voltage Size(L*W*H) 162×140×64(MM) Component power 200W 150W 250W 300W Power of fan 300W...
Need help?
Do you have a question about the JW1230 and is the answer not in the manual?
Questions and answers