Kruger&Matz Style KM0430 Quick Start Manual

EN
❹
KM0430
KM0431
① Touchscreen
② Power/back key
③ Charging interface

Turn on/ Turn off/ Back

• Press and hold power key for 3 seconds to turn on/off smartwatch.
• Press power key to wake up the screen.

Charging

Charge your smart watch using the charging cable provided.
• Connect the USB plug of the cable to power supply charger or
Quick Start Guide USB port in a computer.
• Connect the other end of the cable to the charging interface at
Skrócona instrukcja obsługi
the backside of the smartwatch.

Learn the basics

❺

Navigation

• Swipe the watchface left to view the app page.
❶
• Swipe the app page right to return to watchface, or to return to
❻
app page from upper level menu.
• Swipe up or down to flip through.

Tip:

To change main menu clock style, press and hold the clock (while the
❷
❸ clock on). The display will show available clock motives. Swipe left/
right, then click OK to select chosen style.
④ Microphone

Motion gestures

⑤ Speaker
• Flip to mute incoming call
⑥ Heart rate sensor
• Flip to mute alarm
• Wake-up gesture
When in standby mode (screen turned off), move the watch to wake it up
• Shaking switch mainmenu
Shake upwards or downards to scroll the main menu
• Shake to answer the call
Warning:
Please note, the motion gestures are available only after enabling
them in Settings > Motion.

Synchronization with smartphone

• Scan the QR code on the right to download
FunDo SmartDevice app.
• Select app symbolized with watch icon,
download and install the app on
your smartphone. (Accept app from
unknown sources if necessary).
• Enable the Bluetooth function on both your
smartwatch and smartphone (make sure they are visible for
external devices).
• Run the app and scan for external devices. Find your smartwatch
on the of list of available devices connection in app page, and
click to pair the two devices.
• You may get asked for permission to access your contacts, call
logs and messages. Choose appropriate.
• Once the pairing and synchronization is complete, you can
control your smartwatch from your smartphone.

Safety precautions

• Use only the cable provided to charge smartwatch.
• Use the supplied cable only with USB-compliant ports and chargers.
• Do not charge smartwatch in extremely high or low temperatures.
• Do not dispose of the device in fire.
• Do not charge smartwatch when it is wet, as it may cause danger of electric shock.
• Protect this product from humidity, water and other liquids.
Specifications are subject to change without prior notice.
"The Lechpol company declares that product KM0430/KM0431 is consistent
with the essential requirements and other relevant provisions of directive
1999/5/EC. The proper declaration for download from www.lechpol.eu."
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or Its
literature, indicates that It should not be disposed with other household
wastes at the end of its working life. To prevent possible harm lo the
environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take
this item for environmentally safe recycling. Business users should contact
their supplier and check the terms and conditions of the purchase contract
This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL Zbigniew Leszek,
Miętne, 1 Garwolińska Street, 08-400 Garwolin.